Witryna25 lip 2024 · Ordinary clocks can serve as master, slave, or grandmaster. (Note that it is the only clock type the can function as a grandmaster, which is explained below.) Boundary: A boundary clock has more than one PTP port, with each port being a separate communication path on the PTP network. The boundary clock functions as … WitrynaTo support a 1-Gigabit Ethernet connection to a reference clock, you can use a special interface that is labeled PTP on the faceplate of the QFX10002 switch. This interface is named ptp0 in the Junos OS CLI. This interface only supports encapsulated PTP, ARP, and PING packets to support the reference clock connection.

System Management Configuration Guide for Cisco 8000 Series …

WitrynaThe default is pi. clock_type. Specifies the kind of PTP clock. Valid values are OC for ordinary clock, BC for boundary clock, P2P_TC for peer to peer transparent clock, … WitrynaAn ordinary clock (OC) device can be either a master clock or a slave clock and it is a single port in a 1588 clock domain network. Transparent Clock: A transparent clock … tsl cholet

17.6.5.2.1. Ordinary Clock - Intel

Witryna1.2.3. Functional Flow For A 1588 Ordinary Clock Master/Slave Mode System. The following figure illustrates the functional flow for Altera 1588 reference design system … WitrynaA boundary clock is an Ethernet switch that handles IEEE-1588 packets differently compared to a standard switch or transparent switch. The subnets to a network must isolate PTP packets when installing a boundary clock. The boundary clock acts much like an ordinary clock on the network and becomes the master clock on the isolated … WitrynaThe Clock in a DAQ module is named an Ordinary Clock. A Clock in an Ethernet Switch is named a Boundary Clock. The Master is selected automatically if no Grandmaster Clock delivers absolute time information. This mechanism is called Best Master Clock Algorithm (BMC). phim halloween 2021